Wednesday, August 11, 2010

Recycled Water Bottles ~ Privacy Blind

 
 
 
 
Original Photos by RLHall, ArtfulExpress

Privacy blind created for the window in my small writing loft in my Creekside Studio Shack. Made from the bottom sections of water bottles, fastened together with fishing line and hung on a rod. I remove it and hang it below the window on the wall, when I wish to have a clearer view of my woods. I plan on producing more for the windows in the lower portion of the building as well. I love the atmosphere it provides, while still letting the light in and obscuring the visibility from outside both day and night...

First, I cut off the very bottom section (I used bottles with a flower-like design on the bottom) of each water bottle with a sharp knife, making each 'cup' the same depth, 3/4 - 1" deep.

Then I used a paper punch to make holes on all 4 sides of each cup, about 1/4" from the cut edge.

Last I used fishing line to tie rows of cups all together quite tight, side by side, to create strips the width of the window. And in the same way later tied the strips together at top and bottom until it was long enough for the length of the window.

Also tied the top row a little more loosely to a curtain rod. Then they're ready to hang. The most time consuming, and inconvenient part is collecting and storing the bottles until you have enough to work with  :-)

8 comments:

  1. Anonymous25/8/10 02:13

    very cool!

    maureen

    ReplyDelete
  2. Its awesome! But how, exactly, did you make this...

    ReplyDelete
  3. I like the way you think - outside the box. Pretty cool. :)

    ReplyDelete
  4. Thanks so much, Maureen! I'm glad you like it :-)

    ReplyDelete
  5. Hi Emma, Thanks for the awesome comment :-)

    First I cut off the very bottom section (I used bottles with a flower look at the base)of each water bottle with a sharp knife, making each 'cup' the same depth, 3/4 - 1" deep.

    Then I used a paper punch to make holes on all 4 sides of each cup, about 1/4" from the cut edge.

    Last I used fishing line to tie rows of cups all together quite tight, side by side, to create strips the width of the window.

    And in the same way later tied the strips together at top and bottom until it was long enough for the length of the window. Also tied the top row a little more loosely to a curtain rod. Then they're ready to hang. The most time consuming part is collecting the bottles :-)

    ReplyDelete
  6. Thanks very much, Cecily. I appreciate your Kind comment :-) I like thinking creatively!

    ReplyDelete
  7. Beautiful!! I love this idea!

    ReplyDelete
  8. Thanks for the support, Dannie. Greatly appreciated! Rhonda

    ReplyDelete